Skip to content
CostPerKWh

The Cheapest Way to Heat a House with Electricity

Baseboards, space heaters, electric furnaces, heat pumps, mini splits and electric blankets compared on what the same warmth costs.

By Juan Antonio Fernández Selma · Published November 20, 2026 · Figures use EIA data for August 2026

If your home heats with electricity, winter is when your bill can double or triple. The good news is that electric heating options differ enormously in cost, far more than most people realize. The same amount of warmth can cost three or four times as much depending on how it is made. This guide compares every common way to heat with electricity, shows the cost of each at today's prices, and explains which upgrades and habits pay off fastest.

The one number that matters: heat per kWh

Every electric heater falls into one of two families.

So the first question is not which heater brand is efficient. It is whether the heat comes from resistance or from a heat pump.

What the same heat costs with each option

The table compares the cost of delivering 1,000 kWh of heat, roughly what a modest home might need in a cold month, at the U.S. average price of 18.16¢ per kWh (August 2026, EIA), and in the cheapest and most expensive states.

Heating optionElectricity usedU.S. averageNevada (12.7¢)Hawaii (47.2¢)
Electric baseboard or wall heater1,000 kWh$181.60$127.20$471.80
Plug-in space heater or electric fireplace1,000 kWh$181.60$127.20$471.80
Electric furnace (resistance)1,000 kWh$181.60$127.20$471.80
Central heat pump, cold month (COP 2)500 kWh$90.80$63.60$235.90
Central heat pump, mild month (COP 3)333 kWh$60.53$42.40$157.27
Ductless mini split (COP 3.5)286 kWh$51.89$36.34$134.80

A ductless mini split delivers the same warmth as a baseboard heater for less than a third of the electricity. That is the single largest saving available to most electrically heated homes.

Option by option

Electric baseboard and wall heaters

Cheap to install and easy to control room by room, but the most expensive heat to run in a cold climate. Their strength is zoning: a room you do not use can sit at 55°F. Smart line-voltage thermostats make that easy and pay back quickly. See the baseboard heater cost calculator.

Plug-in space heaters and electric fireplaces

Identical in cost per hour to a baseboard of the same wattage, usually 1,500 W. They save money only when they let you turn down the heat in the rest of the house, and only compared with resistance or expensive fuel heat. The space heater guide walks through when they help and when they do not.

Electric furnaces

A furnace with resistance elements (often 10 to 25 kW) instead of a burner. It heats the whole house through ducts at baseboard prices, so it is usually the costliest whole-house option. Replacing it with a heat pump that uses the same ductwork typically cuts heating electricity by half or more.

Central heat pumps

The standard upgrade for ducted homes. Their weak point is backup resistance strips, which switch on in deep cold, during defrost and when the thermostat calls for a big jump in temperature. Keeping the strips off as much as possible is the key to a low bill; the heat pump page explains how.

Ductless mini splits

Wall-mounted indoor units connected to an outdoor compressor. Variable-speed inverter compressors and no duct losses make them the most efficient common option. One unit in the main living area can carry most of a small home's heating, with baseboards as backup in bedrooms.

Electric blankets, heated throws and personal heaters

The cheapest heat of all, because they warm a person, not a space. They are not a heating system, but they let you keep the thermostat several degrees lower in the evening and at night, which is where much of the saving comes from.

Heat the person, not the house

A useful comparison is what it costs to keep one person warm for an evening or a night:

OptionkWhU.S. average
Electric blanket, all night (queen, 60% duty)0.58$0.11
Heated throw on the couch, 4 hours (100 W, 60%)0.24$0.04
Under-desk radiant panel, 8 hours (150 W)1.2$0.22
1,500 W space heater, 8 hours at 60%7.2$1.31
Heat pump warming a whole floor, 8 hours (3 kW)24$4.36

An electric blanket costs a few cents a night; a space heater in the same bedroom costs about twelve times as much. Combining a lower thermostat with personal heat is the cheapest comfort you can buy.

Worked example: a 1,200-square-foot home with baseboards

A small house in a cold climate is heated by 8 kW of baseboards and uses about 2,000 kWh for heat in January.

  1. Baseline: 2,000 kWh, about $363.20 at today's U.S. average, $254.40 in Nevada and $943.60 in Hawaii.
  2. Add a mini split in the open living and kitchen area, carrying 70% of the heat at an average COP of 2.8: 1,400 ÷ 2.8 = 500 kWh. The baseboards supply the remaining 600 kWh in bedrooms and the bathroom.
  3. New total: 1,100 kWh, about $199.76, a saving of about $163.44 in January alone.
  4. Add programmable thermostats on the bedroom baseboards (62°F during the day) and electric blankets at night: perhaps another 150 kWh saved, about $27.24.

Over a five-month heating season, savings like these can reach well over a thousand dollars in high-price states, which is why mini splits often pay for themselves in a few winters there, especially with utility rebates and federal incentives where available.

Cheap fixes before any new equipment

  1. Seal air leaks around windows, doors, attic hatches, outlets on exterior walls and plumbing penetrations. Drafts can account for a large share of heat loss in older homes.
  2. Add attic insulation if you can see the tops of the ceiling joists; the Department of Energy recommends much deeper insulation in cold climates.
  3. Lower the thermostat at night and when away. With resistance heat there is no recovery penalty; with a heat pump, keep setbacks to 2 to 3°F.
  4. Use window film or heavy curtains on single-pane windows, and open south-facing curtains on sunny days.
  5. Close off unused rooms heated by baseboards and turn their heaters down.
  6. Lower the water heater to 120°F; it is often the second-largest winter load.
  7. Check for time-of-use rates. If you have one, preheat the house slightly before the evening peak.

Which option is cheapest for you?

To price any heater at your own rate, use the electricity cost calculator or look up your utility's rate by ZIP code.

Frequently asked questions

What is the cheapest way to heat a room with electricity?

Heating yourself rather than the room: an electric blanket or heated throw uses 50 to 200 W, a few cents an evening at the U.S. average of 18.16¢. To heat the room itself, a ductless mini split is the cheapest option, using roughly a third of the electricity of a space heater or baseboard for the same warmth.

Is a heat pump cheaper than baseboard heat?

Yes. A heat pump delivers two to four units of heat per unit of electricity, while baseboard heat delivers one. Producing 1,000 kWh of heat costs about $181.60 with baseboards and about $60.47 to $90.80 with a heat pump at today's U.S. average price.

Are infrared or oil-filled heaters cheaper to run?

Not per hour at the same wattage. Every resistance heater, whether ceramic, infrared, oil-filled or quartz, turns one kWh of electricity into one kWh of heat. Differences in comfort come from how the heat is delivered; differences in cost come from wattage, settings and how much space you heat.

How much does it cost to heat a house with electricity per month?

It varies widely. A small, well-insulated home with a heat pump in a mild climate may use 300 to 600 kWh a month for heat in winter, about $54.48 to $108.96 at today's U.S. average. A larger, older home with baseboards or an electric furnace in a cold climate can use 2,000 to 3,000 kWh, about $363.20 to $544.80.

Sources