What an electric fireplace really is
An electric fireplace is two appliances in one cabinet: an LED flame effect and a fan-forced space heater. The flame effect uses LEDs, reflectors and sometimes water mist to imitate flames, and draws only about 10 to 50 W. The heater is a standard resistance element, almost always capped at 1,500 W so it can plug into a regular 120-volt outlet. Some built-in units run on 240 volts and reach 3,000 to 5,000 W.
That split is the key to the cost. With the heat off, an electric fireplace costs about as much to run as a few light bulbs. With the heat on, it costs exactly the same as any 1,500 W space heater: no more and no less, regardless of claims about "infrared" or "quartz" heat.
Electric fireplace cost at low, average and high rates
Today's U.S. average rate is 18.16¢.
| Usage | kWh | Low rate (12¢) | Average rate (16.5¢) | High rate (30¢) |
|---|---|---|---|---|
| Flame only (30 W), 5 hours | 0.15 | $0.02 | $0.02 | $0.05 |
| Heat on high, 1 hour at full power | 1.5 | $0.18 | $0.25 | $0.45 |
| Heat with thermostat (60%), 5 hours | 4.5 | $0.54 | $0.74 | $1.35 |
| Flame only, 5 h/day, a month | 4.5 | $0.54 | $0.74 | $1.35 |
| Heat on thermostat, 5 h/day, a month | 135 | $16.20 | $22.28 | $40.50 |
| Heat on low (750 W) with thermostat, 5 h/day, a month | 68 | $8.10 | $11.14 | $20.25 |
Worked example: zone heating the living room
A family keeps the whole house at 70°F with a gas furnace. In the evening, they sit in the living room for 5 hours. They try running an electric fireplace in that room and lowering the central thermostat to 64°F during those hours.
- Fireplace: 1.5 kW × 0.6 × 5 h × 30 days = 135 kWh, about $24.52 a month at $0.1816 per kWh.
- Furnace: the 6°F setback for 5 hours a day cuts gas use modestly, often by a few percent of the monthly heating bill.
- Whether it saves money depends on the gas price and the size of the house. In a large, gas-heated home it can roughly break even; in a home heated by electric baseboards, zone heating one room with the fireplace and turning down the rest usually saves.
If you mostly enjoy the look, running the flames without heat and leaving the central heating alone is the cheapest option.
Safety and setup
- Plug it directly into a wall outlet, not an extension cord or power strip, as with any heater.
- Do not share the circuit with other large loads: 1,500 W uses most of a 15-amp circuit.
- Keep the heater outlet clear of curtains, blankets and furniture.
- Choose a model with a thermostat, timer and overheat shutoff.
Ways to spend less
- Use the flame effect alone when the room is already warm.
- Set the built-in thermostat instead of running on continuous high.
- Use the low heat setting (about 750 W) in smaller rooms.
- Turn it off when you leave the room; the timer helps.
