Look around a typical American living room at night and you will see a constellation of small lights: the TV's standby LED, the cable box clock, a console's orange glow, chargers, speakers and routers. Each of those devices is drawing power while you are not using it. That steady background draw is called phantom load, standby power or vampire power. The Department of Energy estimates it can account for roughly 5 to 10% of residential electricity use. This guide shows how to put a dollar figure on it, which devices are the real culprits, and which popular advice is not worth the effort.
The one-watt rule
Anything that draws power around the clock uses it for 8,760 hours a year. So every watt of continuous draw adds up to:
1 W × 8,760 hours ÷ 1,000 = 8.76 kWh a year
At the EIA's August 2026 average residential price of 18.16¢ per kWh, each watt of standby costs about $1.59 a year. A device drawing 10 W all the time costs about $15.91; one drawing 50 W costs about $79.54. At 30¢ per kWh, as in California or much of New England, multiply those figures by about 1.7.
What common devices draw when "off"
Standby power varies by model and age. Federal and international efficiency rules have pushed most new chargers, TVs and appliances below 1 W in standby, but devices that stay partly awake to listen for commands, record shows or download updates draw much more. Typical values:
| Device | Typical standby watts | kWh per year | Cost per year at 18.2¢ | Verdict |
|---|---|---|---|---|
| Phone charger, nothing attached | 0.1 W | 1 | 16¢ | Not worth unplugging |
| Modern TV in standby | 0.5 W | 4 | 80¢ | Not worth unplugging |
| Microwave or range clock | 2 W | 18 | $3.18 | Leave it |
| Wi-Fi router and modem | 10 W | 88 | $15.91 | Needed; leave on |
| Smart speaker, idle | 2.5 W | 22 | $3.98 | Leave on if used |
| Printer, idle | 3 W | 26 | $4.77 | Switch off at a strip |
| Sound bar or AV receiver in standby | 5 W | 44 | $7.95 | Smart strip |
| Game console in rest or instant-on mode | 10 W | 88 | $15.91 | Change to energy-saving mode |
| Cable or satellite DVR box | 25 W | 219 | $39.77 | Ask for a newer box, or unplug spares |
| Desktop computer left on, idle | 60 W | 526 | $95.45 | Enable sleep |
| Old second refrigerator, nearly empty | 55 W | 482 | $87.49 | Unplug it |
Added together, this list draws about 173 W continuously, or 1,516 kWh a year: $275.37 at today's average price. Most of that comes from four items: the DVR box, the idle desktop, the old fridge and the console in rest mode. The chargers and modern TVs together cost less than a dollar.
Worked example: measuring a home's baseload
You can estimate your own total phantom load without measuring each device. If you have a smart meter, your utility's website likely shows hourly use.
- Find the lowest hourly reading in the middle of the night, when nothing is in use except things that are always on. Suppose it is 0.35 kWh in one hour.
- That means the home draws about 350 W continuously at minimum. Part of it is the refrigerator and freezer cycling, perhaps 100 to 150 W on average.
- Subtract those: about 200 W is everything else that never turns off.
- Yearly: 200 W × 8.76 = 1,752 kWh, which costs $318.16 at 18.16¢.
If your overnight baseload is well above 300 W without electric heat or a pool pump running, there is probably something worth finding.
How much a typical household could save
The average U.S. home used about 10,356 kWh in 2024 (EIA). If standby power is 5 to 10% of that, it is 518 to 1,036 kWh, or $94.03 to $188.06 a year at today's average price. You cannot eliminate all of it: routers, smoke alarms, security systems, the refrigerator's controls and the furnace's electronics need to stay on. A realistic target is cutting the biggest offenders, which typically saves $37.61 to $75.23 a year.
The fixes that work
Change settings first
- Game consoles: switching from instant-on or rest mode to energy-saving mode often cuts standby from 10 W or more to under 1 W. It is the easiest win in most homes with a console.
- Computers: set desktops to sleep after 10 to 20 minutes idle. A sleeping desktop draws a few watts instead of 50 to 100.
- TVs and streaming boxes: turn off "quick start" or "fast boot" features that keep the set partly awake.
Then use smart power strips
An advanced power strip senses when the "master" device, usually the TV or computer, turns off and cuts power to the peripherals plugged into it: sound bar, console, subwoofer, printer, speakers. Many utilities offer them free or discounted through efficiency programs.
Deal with the hidden big ones
- Cable and satellite boxes: older DVRs can draw nearly as much off as on. Ask your provider whether a newer, lower-power box is available, and return boxes for rooms where you no longer watch.
- Second refrigerators and freezers: technically not standby, but a nearly empty garage fridge is the largest "always on" load in many homes.
- Old electronics: a stereo receiver, an aquarium heater or a dehumidifier left running in an unused room.
Advice that is not worth the effort
- Unplugging phone chargers with nothing attached: they draw a tenth of a watt or less, a few cents a year.
- Unplugging modern appliances with only a clock: a dollar or two a year at most.
- Switching the router off every night: it saves a few dollars a year and costs you updates, security patches and convenience.
- Unplugging anything that must stay on: refrigerators, medical devices, security systems.
Standby rules and labels
Standby power has fallen sharply for new products. Federal efficiency standards for external power supplies, the chargers that power phones, laptops and many small devices, limit how much they can draw with nothing attached. ENERGY STAR specifications for TVs, computers, audio equipment and set-top boxes include limits on low-power and sleep modes, and many manufacturers design to international one-watt targets for standby. That is why a ten-year-old cable box or receiver often draws many times more than its modern equivalent. When you replace electronics anyway, check the specification sheet for "standby" or "networked standby" power, and look for the ENERGY STAR label.
Networked standby is the new phantom load
Devices that stay connected so they can wake on a voice command, an app or a scheduled update, such as smart TVs, speakers, consoles and streaming boxes, draw more in standby than devices that simply wait for a remote. Turning off features you do not use, like "wake on network" or instant-on, is usually the fix.
How to measure any device
A plug-in electricity usage monitor, which sits between the outlet and the device, shows exactly how many watts it draws, on and off. They cost about $20, and many public libraries and utilities lend them for free. Leave the device in its normal "off" state for a few minutes and read the watts. For a weekly average, leave the meter in place for several days and read the kWh.
Then enter the watts with 24 hours a day in our electricity cost calculator to see the cost at your own state's rate. To see what consoles, computers and TVs cost while they are actually in use, see the game console, computer and TV pages.
Frequently asked questions
How much does phantom power cost the average household?
If standby loads are 5 to 10% of usage, as the Department of Energy estimates, an average home using 10,356 kWh a year spends 518 to 1,036 kWh on them, about $94.03 to $188.06 a year at 18.16¢. A few devices usually account for most of it.
Do phone chargers use electricity when nothing is plugged in?
Very little. Modern chargers draw well under half a watt with nothing attached, often under a tenth of a watt, which costs a few cents a year. Unplugging them is harmless but saves almost nothing; the bigger standby loads are cable boxes, game consoles in rest mode and computers that never sleep.
Do smart power strips really save money?
They help most around entertainment centers and computer desks, where one main device switches several others. When the TV or computer turns off, the strip cuts power to the sound bar, console, speakers or printer. Savings depend on how much those peripherals draw in standby; in a typical setup they range from a few dollars to around twenty dollars a year.
Should I turn off my Wi-Fi router at night?
Usually not. A router and modem together typically draw 10 to 20 W, a few dollars a year for the overnight hours. Switching them off daily interrupts updates, smart home devices and security systems, and the savings are small compared with fixing a single large standby load such as an old DVR or an idle desktop.
Sources
- U.S. Department of Energy, Energy Saver – Estimating appliance and home electronic energy use (archived)
- EIA Electric Sales, Revenue, and Average Price – 2024 average monthly bill (Table 5A)
- EIA Electric Power Monthly, Table 5.6.A – Average price of electricity by state
- EIA 2020 Residential Energy Consumption Survey – end-use consumption (Tables CE5.3a, CE5.3b)
